Greenhouse Irrigation Systems Market Rising Demand | CAGR of 12.0%

Overview

New York, NY – Oct 30, 2025 – The global greenhouse irrigation systems market was valued at USD 1.5 billion in 2024 and is projected to reach USD 4.7 billion by 2034, growing at a CAGR of 12.0% from 2025 to 2034. In 2024, North America dominated the market, holding a 42.9% share, equivalent to approximately USD 0.6 billion in revenue. The growth is primarily driven by the rising need for water-efficient agriculture and the adoption of automated irrigation technologies that ensure precise water distribution and improve crop yield in controlled greenhouse environments.

Greenhouse irrigation systems—comprising drip, sprinkler, and micro-irrigation solutions—have become critical to addressing water scarcity and climate variability challenges. The introduction of IoT-enabled systems, sensors, and AI-based controllers has enabled real-time monitoring and automation, significantly optimizing water use and reducing labor dependency.

In India, government initiatives such as the Pradhan Mantri Krishi Sinchayee Yojana (PMKSY) and its “Per Drop More Crop” (PDMC) component have accelerated adoption. By 2022–23, approximately 11.02 lakh hectares were covered under micro-irrigation—5.32 lakh hectares via drip and 5.70 lakh hectares via sprinkler systems. The ₹5,000 crore Micro Irrigation Fund (MIF), operated through NABARD, offers low-interest loans to states for implementing micro-irrigation projects. Between 2015 and 2024, over 8.3 million hectares were brought under micro-irrigation, with a large portion supporting greenhouse and horticultural production.

• Private players are also contributing to innovation. For example, Netafim India launched ‘Toofan’, a new irrigation solution expected to reach 35,000 farmers by 2025, reflecting the ongoing shift toward digitally integrated, sustainable irrigation practices in agriculture.

Key Takeaways

• Greenhouse Irrigation Systems Market size is expected to be worth around USD 4.7 Billion by 2034, from USD 1.5 Billion in 2024, growing at a CAGR of 12.0%.
• Non-Renewable power sources held a dominant market position in the greenhouse irrigation systems market, capturing more than 67.3% of the total share.
• Drip Tape & Drip Lines held a dominant market position in the greenhouse irrigation systems market, capturing more than 31.6% of the total share.
• Vegetables held a dominant market position in the greenhouse irrigation systems market, capturing more than 43.2% of the total share.
• New Installations held a dominant market position in the greenhouse irrigation systems market, capturing more than 34.1% of the total share.
• North America held a dominant position in the greenhouse irrigation systems market, capturing more than 42.90% of the total market share, valued at approximately USD 0.6 billion.

➤ For a deeper understanding, click on the sample report link: https://market.us/report/greenhouse-irrigation-systems-market/free-sample/

Report Scope

➤ Directly purchase a copy of the report – https://market.us/purchase-report/?report_id=159611

Key Market Segments

By Power Source Analysis – Non-Renewable Power Source Dominates with 67.3% Market Share in 2024
In 2024, non-renewable power sources accounted for 67.3% of the global greenhouse irrigation systems market, maintaining dominance due to their reliability and cost-effectiveness. Diesel and natural gas continue to be the preferred energy options for irrigation pumps, especially in regions with limited renewable energy infrastructure. Their consistent energy supply and lower upfront costs make them suitable for large-scale greenhouse operations. Despite rising awareness of sustainability, dependency on non-renewable sources remains strong where renewable alternatives are economically or logistically unviable.

By Product Part Analysis – Drip Tape & Drip Lines Lead with 31.6% Market Share in 2024
Drip tape and drip lines emerged as the leading product segment in 2024, capturing 31.6% of the total greenhouse irrigation systems market. The segment’s growth is attributed to increasing adoption of precision irrigation systems that deliver water directly to plant roots, reducing wastage and enhancing yield. These systems are widely used in greenhouses due to their cost-effectiveness, ease of installation, and adaptability to different crop types. The ongoing push toward water conservation and sustainable agriculture continues to support demand for drip irrigation technologies globally.

By Crop Type Analysis – Vegetables Lead with 43.2% Market Share in 2024
In 2024, the vegetable segment dominated the greenhouse irrigation systems market, holding a 43.2% share. The segment’s strength stems from the rising demand for fresh and locally produced vegetables, coupled with the need for stable year-round cultivation. Greenhouse systems enable precise control over temperature, humidity, and irrigation, which is essential for crops like tomatoes, cucumbers, and leafy greens. Increasing urbanization and the shift toward organic and sustainable farming are further driving the adoption of irrigation systems for greenhouse-grown vegetables.

By Application Analysis – New Installations Lead with 34.1% Market Share in 2024
New installations accounted for 34.1% of the greenhouse irrigation systems market in 2024, reflecting the growing establishment of modern greenhouse projects worldwide. The expansion is fueled by advancements in irrigation technologies and increasing emphasis on water-efficient farming. Farmers are investing in advanced drip and automated systems to optimize productivity and sustainability. Government initiatives and subsidies promoting micro-irrigation have further encouraged the setup of new systems. This segment is expected to maintain its dominance as global agricultural practices shift toward technologically integrated greenhouse operations.

List of Segments

By Power Source

• Renewable
• Non-Renewable

By Product Part

• Spinners & Sprays
• Micro Sprinklers/Emitters
• Regulators
• Drip Tape & Drip Lines
• Hoses
• Valves
• Others

By Crop Type

• Vegetables
• Flowers & Ornamentals
• Fruit Plants
• Nursery Crops
• Others

By Application

• Misting & Spraying
• Drip
• Ebb & Flow Bench
• Mat
• Hand Watering
• Others

Regional Analysis

North America Leads the Greenhouse Irrigation Systems Market with 42.90% Share in 2024

In 2024, North America dominated the global greenhouse irrigation systems market, accounting for 42.90% of total revenue, valued at around USD 0.6 billion. The region’s strong position is supported by the rapid adoption of advanced irrigation technologies in the United States and Canada, where precision farming and water-efficient practices are increasingly emphasized. The demand for sustainable and resource-optimized agriculture has accelerated the integration of drip and automated irrigation systems across commercial greenhouses.

Additionally, supportive government initiatives, including the U.S. Department of Agriculture’s Water Conservation and Efficiency Program, have encouraged farmers to adopt modern irrigation technologies. North America’s technological innovation, developed infrastructure, and commitment to sustainable farming continue to reinforce its leadership in the global market.

Top Use Cases

Precise water saving and yield improvement: Drip and micro-irrigation systems deliver water directly to the root zone, typically reducing water use by 30–70% compared with surface irrigation while improving crop yields; specific savings depend on crop and management. This precision is especially valuable in greenhouses where controlled delivery increases fruit set and uniformity.

Rapid adoption under national subsidy programmes: Government programmes have driven scale-up: under India’s PMKSY–“Per Drop More Crop”, 11.02 lakh hectares were covered by micro-irrigation in 2022–23 (drip: 5.32 lakh ha, sprinkler: 5.70 lakh ha), and 83.46 lakh ha had been covered under PDMC from 2015–16 to 2023–24. Subsidy and finance vehicles such as the ₹5,000 crore Micro Irrigation Fund (MIF) have supported state roll-outs. These measures have directly increased greenhouse and protected cropping irrigation adoption.

Cost and resource efficiency via IoT and automation: IoT controllers, soil-moisture sensors and automated valves reduce water and labour needs; field studies report ~30% or greater irrigation savings and substantial labour reductions when smart controllers are applied. Real-time control enables event-based irrigation, minimizing over-watering and nutrient leaching in greenhouse systems.

Scalable small-holder outreach with low-cost drip products: Commercial initiatives target scale: for example, Netafim India’s Toofan drip solution aimed to reach 35,000 farmers by 2025, showing how economical drip lines expand access for smaller greenhouse growers and enable wider adoption of protected-crop irrigation. Such scalable products lower per-hectare costs and accelerate uptake.

Climate resilience and water-stress mitigation: Greenhouse irrigation systems allow year-round production and buffer crops against erratic rainfall; where groundwater is stressed, modern irrigation combined with rainwater harvesting has been used to improve recharge and stabilize water tables—state programmes report large area increases under drip and sprinkler that correlate with improved local groundwater metrics.

Recent Developments

The Toro Company reported full-year net sales of USD 4.58 billion in fiscal 2024, up from USD 4.55 billion in 2023. The company’s irrigation solutions—which span landscape, agricultural and greenhouse applications—benefit from its global presence across more than 125 countries. For greenhouse irrigation, Toro leverages its Irritrol and Toro brands to provide precision systems and automation tailored to controlled-environment agriculture, helping growers optimize water use and improve crop throughput.

Netafim Ltd (part of Orbia Precision Agriculture) recorded group revenue of USD 8.2 billion in 2023, with its subsidiary specialising in greenhouse and drip/micro-irrigation solutions. Netafim offers full-scale greenhouse irrigation systems—including PCJ-CNL drippers, fertigation modules and GrowSphere™ digital platforms—that enable water-efficient root-zone delivery and automated nutrient management. With operations in more than 100 countries, Netafim is well-positioned to serve the rising demand for precision irrigation in controlled-environment agriculture.

Jain Irrigation Systems Ltd, a prominent Indian micro-irrigation specialist, reported consolidated revenue of ₹ 61,473 million for the year ended March 31 2024, marking a growth of about 7.0 % year-on-year. The company emphasises greenhouse and controlled-environment irrigation systems under its larger irrigation portfolio, helping growers optimize water use and crop yield. As a market research analyst would note, Jain’s integration of micro-irrigation, drip systems and climate-controlled solutions positions it well in the expanding greenhouse irrigation systems market.

Nelson Irrigation Corporation, a U.S.-based provider of precision irrigation equipment, reported annual revenue of approximately USD 49 million in 2024. The company’s product range includes advanced drip and sprinkler systems designed for greenhouse and controlled-environment agriculture, with emphasis on adaptable layouts and automated control valves. It holds a focused niche role in the greenhouse irrigation market, catering to growers seeking water-efficient, scalable systems in both small and larger greenhouse operations.

Micro Grow Greenhouse Systems (Temecula, California) has been active for over 40 years, specialising in greenhouse watering and environmental-control systems, including irrigation/misting, sensor-based monitoring and custom control cabinets. The firm’s products are used by commercial growers, research institutions and Fortune 500 companies, indicating its relevance in greenhouse irrigation. While no specific 2023/24 revenue is publicly disclosed, its focus on automated greenhouse irrigation solutions positions it well in the growing greenhouse irrigation systems market.

Rain Bird Corporation, a global irrigation-products company founded in 1933, provides a broad portfolio including driplines, subsurface irrigation systems, soil-moisture sensors and weather-based controllers used in greenhouse and controlled-environment agriculture. In 2023, the company celebrated its 90 th anniversary and reported strong momentum in its central-control product “CirrusPRO™”. Rain Bird’s stated commitment to “The Intelligent Use of Water™” aligns with greenhouse growers’ demand for precise, water-efficient irrigation technologies.

Valmont Industries, Inc. reported that in its Agriculture segment, which includes mechanized and precision irrigation systems, it supported over 150,000 connected monitoring devices and remains a leader through its Valley® brand. While specific greenhouse-irrigation numbers are not broken out for 2023 or 2024, the company publicly reaffirmed its focus on irrigation technology and targeted value-creating growth opportunities.

Rivulis Irrigation provides drip-line and micro-irrigation systems for greenhouse, horticulture and hydroponic applications, stating that its Hydro PC/PCND drip line has sold over 1,300,000,000 meters over 25 years. In its 2023 ESG report it noted deployment across 22 factories and 3,000 employees globally, supporting greenhouse-scale irrigation solutions through digital and precision platforms. This robust scale positions Rivulis as a key player in greenhouse irrigation growth.

EPC Industries, rebranded as Mahindra EPC Irrigation Limited, specializes in micro-irrigation systems including drip and sprinkler solutions and greenhouse water-management products. In Q3 FY24, the company reported revenue of ₹80.29 crore for the three months ended December 2023, representing a 22.04% year-on-year increase. Its greenhouse-irrigation-focused business supports protected-cultivation operations by offering irrigation and agronomy services, positioning it within the expanding greenhouse irrigation systems segment.

Irritec S.p.A., an Italian precision-irrigation company, provides dedicated greenhouse irrigation solutions including drip-lines and fertigation kits. Its website highlights water-savings of up to 50% and yield increases of 20–90% for greenhouse producers using its systems. Serving over 90 countries from more than 11 factories worldwide, the company offers specialised products for “protected crops” and underscores digital automation and sustainability in its greenhouse irrigation portfolio.

Conclusion

In conclusion, greenhouse irrigation systems are increasingly becoming a foundational component of modern agriculture, offering significant benefits in water efficiency, yield optimization, and sustainable operations. As governments and commercial growers intensify efforts to combat water scarcity and produce higher-quality crops in controlled environments, the need for drip, micro-irrigation, and automated greenhouse water-management systems will grow.

Technologies such as IoT sensors, automated valves, and fertigation modules are enabling precision irrigation that aligns with both economic and environmental targets. In this evolving landscape, stakeholders who adopt integrated, data-driven irrigation solutions are likely to realize competitive advantages—not only in terms of resource efficiency and crop output—but also in meeting regulatory and ESG objectives.

Discuss Your Needs With Our Analyst

Please share your requirements with more details so our analyst can check if they can solve your problem(s)

Request a Sample Download PDF